Defiant Two Programming Manual

Diagram showing how to install batteries in a device and enter the default master code 123456 for bolt direction detection. The illustration includes a schematic of four alkaline batteries, a keypad with numbered buttons, and a wall-mounted device with a door lock, with instructions for battery placement and code entry.
Instructions for testing a lock, showing how to lock, unlock with a code, and program the lock including warnings to avoid locking out and to change the master code.
Diagram of programming instructions for a lock system, showing labeled parts including keypad, enter/lock button, and mechanical override, with explanatory notes for each component and function.
Diagram of a device with labeled parts including a battery cover, interior thumbturn, and set button, and instructions for removing the battery cover during and after installation.
Instructions for changing the master code on a lock, including pressing the [SET] button, entering the current master code, pressing specific buttons, entering a new master code, and exiting programming mode.
Step-by-step instructions with images on how to add and program user codes on a security device, including pressing the set button, entering master and new user codes, and exiting programming mode.
Instructions for deleting individual user or single-entry codes on a security system keypad, including steps to enter programming mode, input current master or user codes, and delete unwanted codes.
Instruction sheet titled 'Delete all User / Single-entry Codes' with steps to delete user codes and use a master code. It shows diagrams of a keypad device, pressing the [SET] button, entering the master code, and pressing specific buttons to delete user codes.
Instructions for adding single-entry codes to a keypad lock, including steps to press the set button, enter the current master code, press specific buttons, enter new codes, and exit programming mode.
Instruction manual page explaining how to activate and deactivate Vacation Mode on a security system, including steps to press the [SET] button, enter the Master Code, and turn the system on or off.
Instruction guide titled 'Enable or Disable Beeper' with steps for turning the beeper on or off, including pressing the set button, entering a master code, and toggling the beeper.
Diagram showing how to enable and disable the auto-lock function with instructions for pressing buttons and entering a master code to turn the lock on or off.
Instructions for setting an auto-lock delay timer, including steps for pressing buttons and entering a master code on a keypad.
Steps to restore a device to factory settings, including removing a battery, holding the set button while inserting the battery, and entering the default master code 123456 on the keypad.